One of the major issues when driving on highways is flat tyres. This usually happens when a very sharp object impacts the outer wall and ruptures it completely. Another reason could be high air pressure in the tyres; usually, the air within heats up and expands when the tyres speed. This causes the outer wall to burst, and tyres go flat.
Therefore, it is crucial to always carry a spare tyre in the boot so that you can easily evade such unpleasant situations. Usually, when we are stranded in the middle of the road, we cannot expect an expert’s help. Therefore, it is crucial to know the basics of tyre replacement. This article deals with tips for tyre replacement.
Initiate the safety protocol
When the tyres go flat, vehicle handling and stability are adversely affected, and it is difficult to maintain a proper linear motion. As soon as you experience a disturbance in vehicle stability, pull your car on the side of the road and apply the handbrakes. Also, switch on the emergency lights so that other vehicles following you get clear visibility of a breakdown.
Also, if you are stranded on an inclined surface, do not completely rely on the handbrakes. Look for some medium-sized rocks around you and place them under each tyre. These rocks provide extra support in the event of unprecedented motion. If you carry parking cones with you, place them around your vehicle to create a safe zone against other vehicles.
Draw out all the tools
This might seem a redundant tip, but one of the most common mistakes people make is, they keep opening the boot when the car is off the ground. This disturbs the vehicle stability, and the car may bounce off the jack.
For this reason, pull out the toolkit, owner’s manual, spare tyre and car-jacks. Arrange all the tools close to the affected tyre to speed up the replacement process because you cannot rely on the jacks’ strength. From the toolkit, take out the driver that is designed specifically for your wheel’s nuts.
Loose the screws beforehand
One of the rookie mistakes people make while replacing flat tyres is, they start unscrewing the Performance Tyres Newbury when the car is off the ground. The problem with this process is that the tyres start rotating on their axis, making the process difficult.
Also, the moving tyres may hurt you with the constant motion, and you might also get hurt with the tools you will be using because there is a chance of them slipping out and impacting your body.
Place the jack carefully
The placement of car-jacking is crucial to ensure vehicle stability when you are working on the tyres. First, locate the midpoint of the vehicle along the vertical length and accordingly place the car-jacking. Ensure that the lifting ability of the jack is compatible with your vehicle.
However, placing the jack along one side disturbs the car’s linear alignment, and the vehicle tilts in one direction. This poses a great safety concern for the person replacing the tyres. Therefore, it is crucial to carry two car-jacks at all times so that the car-load can be equally distributed. If you operate a heavy vehicle, you need to ensure that you have a heavy-duty jack with a minimum of ten-ton capacity.
Inflate your tyres
Once you have concluded the replacement process, take the car off the jack and start inflating your Car Tyres Newbury with the manual pump’s help. Also, screw in a pressure gauge on the tyre’s valve to ensure that recommended air pressure is maintained. The recommended pressure is mentioned either on the fuel chamber or the driver’s door.
My Fact Blogs 