If you are a good driver, you would always ensure that there is no negative impact on the vehicle while driving, especially in harsh conditions. Tyres are that part of a vehicle that tends to suffer a lot due to harsh driving.
There are many tests like MOT, which are performed to analyse the condition of your vehicle. Here are some simple tips that you should follow to reduce the tear and wear of your tyres and perform well in such tests.
Go slow on unpaved roads
It is not just about not driving fast on unpaved roads, but about driving cautiously and at a relatively low pace on such roads. It is important as a good driver that you understand the condition of your vehicle’s roads.
If you find that the roads have large stones, potholes, debris, gravel, or roads where hard rocks are present, you must drive with utmost caution. You can feel that your vehicle is running on uncomfortable road conditions through various means such as vibration in the tyres Blue Bell, steering wheel or sometimes even in the seat.
At such times you must slow even further and make sure that ill road condition does not negatively affect the condition of your tyres and vehicle.
Apply the brakes gently
Harsh braking can negatively affect the condition of your tyres. Therefore, especially when you are driving at high speed and have to stop your car, you should not apply brakes immediately as it puts a lot of stress on the tyres.
This stress can lead to many disadvantages to your tyres like faster wearing, loosening of beads and grooves, damage to the suspension and wheel etc. All these damages can lead to accidents and other mishaps.
It would help if you were attentive while driving so that you can avoid harsh braking. When you are towing a bigger vehicle than yours, there is much pressure on your tyres, and they are not in a condition to take more stress from harsh braking. It can affect the brake pads as well.
Make sure that the car seat is positioned correctly
Most people are unaware that incorrectly positioned sweets in a vehicle may lead to the tear and wear of your tyres. As a result, almost all cars today come with adjusting your seat according to the drivers’ comfort.
If you are not comfortable during driving, you tend to brake hard while driving as compared to study and smooth braking. This directly poses extreme stress on the tyres deteriorating their condition.
The more you sit comfortably in front of the steering wheel with a real difference between your legs and brake pads, the easier it is to operate the vehicle. So here is a quick tip for you.
If you are wondering what would be the correct position and distance from the steering wheel of your seat, then you should hold the upper part of the steering wheel and keep the arm straight while you are adjusting your seat.
After you have lessened or extended the seat from the steering wheel and your arm is extended in a straight position, you can lock that ideal seat position for you.
Don’t turn the steering wheel unnecessarily
Without moving in the forward direction, if the driver moves the steering wheel regularly, it can put enormous pressure on your tyres resulting in their wear.
While there may come many situations like driving in narrow streets or parking in small areas, you may need to move the steering wheel frequently; make sure that while going in straight movement, your steering wheels move only when necessary.
When your vehicle is moving, it is not a big issue if you frequently move the steering wheels, but when not in motion, it causes great damage to the tyres Telford, and you might have to take the vehicle to the car repair.
My Fact Blogs 